Eaton's Intelligent Power Manager (IPM) software provides the tools needed to monitor and manage power devices in your physical or virtual environment. This innovative software solution ensures system uptime and data integrity by allowing you to remotely monitor, manage and control UPSs and other devices on your network. Download Eaton Intelligent Power Manager (IPM) Eaton’s mission is to improve the quality of life and the environment through the use of power management technologies and services. We provide sustainable solutions that help our customers effectively manage electrical, hydraulic and mechanical power – more safely, more efficiently and more.

FCD-IPM E1/T1 or Fractional E1/T1 Modular Access Device with Integrated Router

FCD-IPM from RAD is an E1/T1 or fractional E1 / T1IAD. It enables service providers to bundle data, IP, and voice access services over a single E1 or T1 line (see Figure 1).
FCD-IPM features two slots for various modules:
Single or dual sub-E1 / T1 module
4-port or 8-port analog voice module
10/100BaseT 5-port LAN module
Transparent N × 64, N × 56 data module.
FCD-IPM integrated router supports IP/IPX routing and transparent bridging.
An optional integrated 4-port Ethernet/Fast Ethernetswitch can be installed in place of single or dual LAN ports.
A single transparent N × 64, N × 56 data port enables connecting an external router or other HDLC-based devices.
FCD-IPM supported WAN services are:
T1 or fractional T1CSU/DSU operating at rates of up to 1.544 Mbps
E1 or fractional E1, with or without LTU, operating at rates of up to 2.048 Mbps
E1 over SHDSL
E1 or T1 over fiber optic links
Frame Relay with auto-learn of DLCI and maintenance protocol
ISDNBRI (“U” or “S” interface) for data services backup.
FCD-IPM internet access capabilities are enhanced through:
IP Service Access – authentication is provided by PAP/CHAP
Solid Firewall – protects an office LAN from undesired entry from the Internet
NAT – allows various LAN users to share several legal IP addresses
Single IP address translation – allows a small or medium office LAN to connect to the Internet using a single IP address that can be
allocated in a dynamic or static way
DHCP server – allows sharing IP address pools between DHCP clients on the LAN.
FCD-IPM supports up to 12 analog voice channels.
These channels are PCM-encoded with A-Law or μ-Law. The interface options are:
2-wire FXS for direct connection to telephones
2-wire FXO for direct connection to a PBX extension line
2-wire or 4-wire E&M for connection to PBX tie lines.
The sub- E1 / T1 or analog voice ports provide toll-quality voice transmission.
The fail-safe bypass of the built-in sub- E1 / T1 link ensures the continuity of voice services in case of power supply failures. The
bypass is not available for the SHDSL or fiber optic main links. ISDN or PSTN backup, using an external dial-upmodem, ensures the
continuity of data services. An optional data port can be utilized as a second serial routerport.
FCD-IPM configuration is easily accomplished through a quick setup menu, using a terminal attached to the control port or by Telnet
access into the device over the LAN / WAN.
FCD-IPM from RAD features a variety of inband and out-of-band management options.
These options include dedicated timeslot, dedicated DLCI and dial-in connectivity.
The SNMPagent provides management by RADview or any other standard SNMP management station.
Undesired access to FCD-IPM via Telnet or SNMP can be blocked or protected by a password.
The dual-level management authentication allows access to router configuration parameters, while restricting access to network
configuration parameters.
Software download is available via the control port, using XMODEM or via LAN/WAN using TFTP.
Parameter file download and upload is available via LAN or WAN using TFTP.
FCD-IPM product data sheet (pdf)

Eaton’s Intelligent Power Manager software enables you to:

• Remotely monitor and manage multiple devices across your network from a single interface
• Suspend non-critical virtual machines, consolidate critical virtual machines and shut down unused servers to extend battery runtime
• Initiate a virtual machine move or graceful shutdown in the event of an extended outage
• Set server power consumption limits for extended battery runtime with Cisco UCS management software or HPE OneView
• Automate disaster avoidance with a planned migration application, such as VMware Site Recovery Manager and Microsoft Live Migration
• Integrate with VMware’s vRealize Operations Manager using Eaton’s Infrastructure Management Pack to manage health, risk and efficiency of power and environmental devices
• See how IPM integrates into a Network and IT closet solution or a Server room solution
• Integration with Microsoft Hyper-V for targeted load shedding and remote agentless shutdown
• IPM integration with VMware vSAN for cluster shutdown capabilities
• OpenStack capabilities for rack power optimization

Find IPM Datacom software downloads at CNET Download.com, the most comprehensive source for safe, trusted, and spyware-free downloads on the Web.

Not sure which license to choose? Check out this comparison

Download Ipm Datacom Network App

One licensed node is defined as a UPS, rack PDU or IPM instance.

See how IPM integrates with:

Download Ipm Datacom Network Login